Beyerdynamic UNITE CR, Quick Start Manual

Page: 15 / 36

e
n
g
li
s
h
Unite CR-12P – Cockpit Rack
15
5.4 Charging
1. Set the switch to “Charge only”, when no automatic pairing function is needed.
2. Insert the bodypack receivers / transmitters into the charging compartments so that the charging contact
of the transmitters / receivers have contact with those in the charging module.
3. Charging will start automatically.
4. The state of charge of the batteries is indicated by the LED of the appropriate device:
Indicator light Charging status
Off Device is switched off
Flashing green slowly Charging 0 - 100%
Green Battery is charged
Flashing yellow slowly Pairing information is being copied from the transmitter
Yellow for 10 seconds Device information is copied successfully to charger/devices
Flashes red slowly for 10 seconds • Too many transmitters in the charger when pairing is initiated
• Other pairing error
Flashing green/yellow rapidly Device is being localised
Flashing red rapidly Charging error