Congratulations on your purchase of this beyerdynamic mobile Headzone
®
headphone monitoring system. Please
now take a few minutes to read this information carefully before using the product.
This quick installation guide only contains information on connecting and operating the system. A detailed
instruction manual specially for working with the supplied Headzone
®
software is featured on the enclosed CD.
1. HBP 2 Headzone
®
base station
- 12 -
HEADZONE
®
PRO XT – QUICK INSTALLATION GUIDE
Front view
ON/OFF switch
Switches power on or off when the device is connected to the mains. Connect the device to the mains before
turning it on. Turn the device off before disconnecting it from the mains.
Preset buttons
By using these buttons you can recall three different system configurations. The selected preset is confirmed by
a short flashing of all three Preset LEDs. When the loading process is finished, the appropriate Preset LED will
illuminate only.
Preset LEDs
The LED of the current preset will illuminate green. When the device is in the upload mode, all three Preset LEDs
are slowly flashing.
Com volume control
Control to set the volume of the Com channel . When working with the Com channel of the Headzone
®
system, always set the volume control to minimum and then slightly increase the volume to a decent value.
Headtracker button
The head tracker is activated or deactivated with this button.
Note:
When two headphones are connected to the system, this button does not work.
Headtracker Status LED
Off = Head tracker is not activated
Green = Head tracker is activated
Red = Head tracker is out of range
Bypass button
Although Headzone
®
is designed to simulate a virtual 5.1 control room, there might be situations where you
want Headzone
®
to operate like a “normal” headphone amplifier when checking a stereo mix or a CD. By
pressing the “Bypass” button Headzone
®
will deactivate all processing (including head tracking) and put out a
stereo downmix of all surround signals. Headzone
®
then works as a reference stereo headphone amplifier. In
this mode, the “Bypass Status” LED on the front of the Headzone
®
base will turn red.
1
2
3
4
5
6
7
17
1
2
3
4
5 6 7 8
9
10
11
12 13
14
15
Summary of Contents for Headzone PRO XT
