4
EN
HOW TO CONNECT THE CABLE
u
The lockable connecting cable is fitted with a 3-pin
mini XLR cable connector to the headphones.
u
For correct assembly, the small release button of the
cable must face to the outer site of the headphone.
u
When connecting the cable, make sure
that the cable connector locks in place of the ear
cup.
u
Caution:
Connect the jack connector of the headphone
cable to a headphone socket only!
If you connect
the headphones to any other jack socket, the head-
phones could be damaged.
u
When you want to change the cable, please press
the small button for release and simultaneously pull
off the cable connector from the headphone.
HOW TO CHANGE THE EAR PADS
u
To remove the ear pad, carefully pull apart the gap
between housing and ear pad using your fingertips
or a narrow blunt object.
u
To attach the ear pad, please make sure that the
snap-in nose of the ear pad sits in the right place.
u
Then press gently with the palm of your hand
against the ear pad until the ring snaps into place.
release button
release button
Summary of Contents for DT 900 PRO X
