Beyerdynamic BLUE BYRD, Manual

Page: 13 / 140

Blue BYRD – In-ear Headphones
13
e
n
g
li
s
h
Player settings for the best wireless sound
To achieve your best possible sound via Bluetooth® with the in-ear headphones, you should consider
the following practical hints:
1.
Set the volume of the in-ear headphones to minimum, and the volume of the player to maximum.
2. Then adjust the volume on the in-ear headphones only, not on the player.
Important:
This applies only to players that do not automatically synchronise the volume.
On players that automatically synchronise the volume (e.g. iPhone, iPad, various Android smart-
phones), the in-ear headphone volume is always identical to the volume of the player.
3. Deactivate any audio effects that might exist in your player software.
Troubleshooting
Problem Cause Solution
In-ear headphones cannot be
switched on Battery is empty or almost
empty Charge the battery
No audio output No Bluetooth® connection Pair the in-ear headphones with
the player
The in-ear headphone does not
appear among the available
Bluetooth® devices on the play-
back device • The in-ear headphones are
switched off
• The in-ear headphones are not
in the pairing mode
• A Bluetooth® connection to
another player exists already
• Turn on the in-ear headphones
• Put the in-ear headphones into
pairing mode
• Disconnect the Bluetooth®
connection to the other player
and connect the in-ear head-
phones to the desired device
Playback volume is low, despite
the volume on the in-ear head-
phone is set to maximum The received audio signal is too
low Increase the playback volume
on the player to maximum
The sound is harsh and the bass
response is too low Insufficient seal of the eartips Change the eartips on the left
and right earphones until the
sound is ideal
The wireless range is too
low or the connection is
disrupted There are interferences with
other devices Move away from WLAN routers
and microwave ovens, ensure
that your body is not between
player and the in-ear head-
phones