bewello BW1009, User Manual

Page: 4 / 24

4
source of danger during operation. Use only splash-proof extension cords with a cross-section of at least
3 x 1 mm
2
. Always disconnect the machine from the electrical mains when not in use. Maintenance must
only be carried out with the mains plug removed.
Operation:
Danger of scalding! Never touch the steam jet or direct it at other people or animals! Due to the
strong emission of steam, there is a risk of scalding during use! Allow the steam boiler to cool down slightly
before refilling. To avoid burns, always allow the appliance to cool down before touching it. Do not use the
appliance for steam cleaning, the appliance is only intended for producing hot water. The device may only
be operated when fully assembled with the factory accessories! If any part is damaged, it must be replaced
before use. Allow the appliance to cool down completely in a well-ventilated place before storing it.
CAUTION!
General advices: Do not use the appliance if you have previously dropped or banged it and it is visibly
damaged! Do not use the appliance if you experience a leak or steam leakage! It is strictly forbidden to
modify or disable safety devices in any way, use as intended!
Operation: Always operate and store the device as described! Always check the integrity of the device,
cable, connector and accessories. In the event of damage, do not use the device! The appliance must only be
operated if there is water in the tank, otherwise the appliance may overheat and be damaged. When using
and maintaining the appliance, make sure that you keep your balance and stable position!
ATTENTION!
Operation: Do not fill the tank with detergent! Use the appliance only at freezing temperatures above
0 ° C to avoid condensation and electric shock. Never leave the appliance unattended when it is connected
to the mains! Do not use the appliance for heating or evaporating! Protect the device from moisture and
water! Do not store the device outdoors in high temperatures. The device is designed for residential use!
Activities involving damage to the device: Do not fill the device with solvents, solvent-based cleaners, acid,
petrol, thinner, acetone or other liquids. Inadequate amounts (above max marking / under min marking) of
water may damage the device in operation. Use the appliance only with clean water! Do not use rainwater,
additives or other condensed water. After use, wait a few minutes for the stainless steel tank to cool down
before boiling another amount of water.
USER MANUAL
Before first use:
1. Remove all packing material from both the kettle and the base.
2. Fill the kettle with lukewarm, clean water up to the mark.
3. Bring the water to boil until the appliance switches off automatically, then pour the water into the sink.
4. Repeat this procedure 3x.
Cleaning the kettle
The kettle needs to be cleaned depending on how often it is used. Do not use chemicals or abrasives to
remove deposited limescale. We recommend using household vinegar or citric acid for cleaning.