21
22
2.
1.
Remove the electrodes from the skin. Place the electrodes back on the liner. Detach from the edges.
When you finished your treatment:
3. Remove the device from the electrodes. If you forget the device for more than 3 minutes, it
If the device is frequently used during the day, it is advisable to charge it before starting a new
session.
Caution: Always end the treatment in the app or by pressing the on/off button before you remove the
device or the electrodes. If you fail to do this, you may get an unpleasant sensation in your
fingers when you touch the connectors. This sensation is not harmful, but it can be unpleasant.
Replacement Electrodes
Replace the electrodes if:
-they are damaged or torn.
-they are past the use-by date indicated on the resealable bag.
-they have lost their adhesive power. Never use plaster or tape to attach them to your skin.
-stimulation feels less strong.
-when stimulation is uncomfortable, i.e. when you experience an unpleasant stinging or biting
sensation.
Note: Always replace the electrodes with electrodes recommended for this device by the manufacturer.
5. STORAGE AND MAINTENANCE
5.1. STORAGE OF THE ELECTRODES
Put the electrodes back into their protective bag. To prevent buildup of dust on the electrodes,
close the bag carefully. Prefer to store electrodes in a place where the temperatures is 5 to 27°C.
Avoid extreme heat and exposure to direct sunlight. Do not keep the electrodes in the freezer
or the refrigerator.
5.2. CLEANING
Warning
: Never immerse the product in water and do not rinse it. Never immerse the elec
This device may be used for personal use. You should clean the device and electrodes after use.
trodes in water. Do not use cleaning agents other than those mentioned below. They could
cause serious damage to the equipment.
1. Using a damp cloth and mild detergent (eg: dishwashing liquid), clean the device. It is also
possible to use isopropyl alcohol at 70° (IPA).
2.
from the surface. Do not use soap or alcohol to clean the electrodes.
