27
28
10. SAFETY PRECAUTIONS
11. DISPOSAL
IP 22
C
The first number 2: Protected against solid foreign objects of 12,5 mm Ф and greater. The second
number: Protected against vertically falling water drops when enclosure titled up to 15º. Vertically
falling drops shall have no harmful effects when the enclosure is titled at any angle up to 15º
，
on either side of the vertical.
aution
Garder au sec / Keep dry
Refer to instruction manual. Note on the equipment “Follow instructions for use”.
Type BF applied part such as electrode
The device, accessories and the packaging have to be disposed correctly at the end of the us-
age. Please follow local ordinances or regulations for disposal.
Manufacturer
SN
Serial number
This symbol means that this device emits nonionising radiation. All devices and systems
that include RF transmitters or that intentionally apply RF electromagnetic energy must be
labelled withthis symbol.
Obsolete batteries must be disposed of in a specially labeled collection container, at toxic
waste collection points or through an electrical retailer.
You are under legal obligation to dispose of batteries correctly.
Please dispose of the device in accordance with the legal obligation.
For transmitters rated at a maximum output power not listed above, the recommended
separation distance (d) in meters (m) can
be estimated using the equation applicable to the frequency of the transmitter, where P is the
maximum output power rating of the transmitter in watts (W) according to the transmitter
manufacturer.
NOTE I At 80 MHz and 800 MHz. the separation distance for the higher frequency range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is
Note: EMC tests conducted including attached electrode cord of 1.5 m length.
The device is intended for use in an electromagnetic environment in which radiated RF
disturbances are controlled.
The customer or the user of the device can help prevent electromagnetic interference by
maintaining a minimum distance between portable and mobile RF communications
equipment (transmitters) and as recommended below, according to the maximum output
power of the communications equipment.
Rated maximum output
power of transmitter
W
Separation distance according to frequency of transmitter
m
150 kHz to 80 MHz
d = 1.2
80 MHz to 800 MHz
d = 1.2
800 MHz to 2.5 GHz
d = 2.3
0.01
0.12
0.12
0.23
0.1
0.38
0.38
0.73
1
1.2
1.2
2.3
10
3.8
3.8
7.3
100
12
12
23
TABLE 6:
Recommended separation distances between
portable and mobile RF communications equipment and the device
