Chapter 7. SETTING: Advanced
N6603 Operations User Manual
71
Select the option for
[On]
to enable alarm output or select the option for
[Off]
to disable it
(
Pic. 7.18
).
Pic. 7.18
Digital output
: allows you to select a voltage level on the camera alarm output:
High
: select this option to increase voltage from 0 to 12 V.
Low
: select this option to decrease voltage from 12 to 0 V.
Trigger condition
: select an event that activates the alarm output.
Select the option for
[Alarm]
to activate the alarm output when an alarm event occurred.
Select the option for
[Timer]
to activate the alarm output according to the specified schedule. The
duration the alarm output is being active depends on the specified intervals. When the
[Timer]
is
selected, the
[Schedule]
button is available, which allows you to specify the intervals.
Alarm
: allows you to select an event that activates the alarm output:
Motion detection
: the camera activates the alarm output when motion detection is
triggered. To configure this option, click the
[Motion detection]
button or go to
SETTING
–
Advanced
– Motion detection
. See paragraph 7.9 for details.
Use alarm buffer
: activates the alarm output when the connection is up after a network
error occurred. To configure the alarm buffer option, click the
[Alarm buffer]
button or go to
SETTING
– Advanced – Alarm buffer
. See paragraph 7.8 for details.
Alarm input
: activates the alarm output when the alarm input is triggered. To configure this
option, click the
[Alarm input]
button or go to
SETTING
– Advanced – Alarm input
. See
paragraph 7.7 for details.
Alarm duration
: you can specify a period for sending alarm signal to the alarm output
according to the
[Digital output]
item.
Summary of Contents for N6603
Page 1: ...IR LEDs built in...
