Chapter 7. SETTING: Advanced
N6603 Operations User Manual
69
Port
: type a port number that is used to connect to the device. The default value is 80.
User ID
: type a username to access the device (64 characters maximum).
Password
: type a password to access the device (32 characters maximum).
Proxy server name
: if you use a proxy server, type its name or IP address (64 characters
maximum).
Proxy port number
: if you use a proxy server, type its port number.
Proxy user ID
: if you use a proxy server, type a username to access it (64 characters
maximum).
Proxy password
: if you use a proxy server, type a password to access it (32 characters
maximum).
[Test]
: click this button to check connection and the entered parameters. A window opens
that shows information about the test process.
NOTE:
Click
[
ОК]
to save changes. Otherwise, the changes may not be saved.
7.4.2. Alarm Sending
This section allows you to configure sending of commands to an external alarm device
when an alarm event occurs. Select the option for
[On]
to enable this feature (
Pic. 7.17
).
Pic. 7.17
Alarm
: allows you to select the following options:
Summary of Contents for N6603
Page 1: ...IR LEDs built in...
