Chapter 7. SETTING: Advanced
N6603 Operations User Manual
53
digits, the minute as 2 digits, the second as 2 digits. Totally, this adds a fourteen-digit
suffix to the file name.
Sequence number
: adds a six-digit number. User can click the
[Clear]
button to reset
the sequence number anytime. When user clicks the
[Clear]
button it resets the
sequence number and starts it from 000001.
Alarm
: allows you to select an event that triggers file transfer to FTP:
Motion detection
: enables motion detection triggered file transfer. To configure this
option, click the
[Motion detection]
button or go to
SETTING
– Advanced – Motion
detection
. See paragraph 7.9 for details.
Use alarm buffer
: when this option is enabled, the camera transfers files to FTP when a
network error occurs. When the connection is lost, the camera sends the records made
before the connection is lost
(record’s length is specified in “pre alarm period” option)
and until the connection is restored
(record’s length is specified in “post alarm period”
option) to the temporary buffer. After the connection is up, the camera resumes file
transfer to FTP. To configure the alarm buffer option, click the
[Alarm buffer]
button or
go to
SETTING
– Advanced – Alarm buffer
. See paragraph 7.8 for details.
IMPORTANT:
When you configuring this menu, be aware that these parameters are applied to the other camera
functions, for example to recording to network storage, FTP, etc.
Alarm input
: enables alarm input triggered file transfer to FTP. To configure this option,
click the
[Alarm input]
button or go to
SETTING
– Advanced – Alarm input
.
IMPORTANT:
When motion detection or alarm input trigger, video files will be transferred with a time interval (about 5-6
seconds) and video files’ length will be 5-6 seconds maximum. However, maximum file size is 2 MB.
When camera transfers images, they will be transferred with frequency of 1 image per 1-2 seconds.
Effective period
: allows you to set a period for uploading files to FTP. The following
options are available:
Always
: select this option for continuous uploading of files.
Schedule
: select this option for scheduled uploading of files. To configure this option,
click the
[Schedule]
button or go to
SETTING
– Advanced – Schedule
.
NOTE:
Click
[
ОК]
to save changes. Otherwise, the changes may not be saved.
Summary of Contents for N6603
Page 1: ...IR LEDs built in...
