Chapter 8. Config. Network Settings
IP Video Door Station DS06M(P) Operation User Manual
44
8.14. HTTP Event
This function sends commands from the door station to other network devices when motion
detection is activated or when the call button is pressed.
The
“HTTP event”
settings menu is shown below:
Pic. 8.15
Enable:
turn on HTTP event function.
Protocol:
select the preferred protocol to send notifications (commands). Available protocols:
HTTP, HTTPS.
Hostname:
address and command for your HTTP event server.
«&» и «=» are unsupported.
For example, For URL
«http://www.eventserver.org» enter «www.eventserver.org» in the
“Hostname” field.
You can also enter a port number, which will differ from the default one (e.g. enter
«www.eventserver.org:81». if the port number is 81).
Default port numbers (
«80» for HTTP and «443» for HTTPS) are set automatically when you
select the protocol.
Request:
enter a request for your HTTP event server. For example
, enter “/alarm” for theURL
«http://www.eventserver.org/alarm» .
Method:
method of sending notifications: GET or POST.
Authorization:
enable authorization for sending notifications
Username:
enter username for authentication. Maximum length is 20 symbols, including
upper case letters and the following symbols:
«!», «@», «#», «$», «*», «_», «-», «,», «.».