
Chapter 7.Config.Video Settings
IP Video Door Station DS06M(P) Operation User Manual
25
Color/BW
: Set a color mode or a black and white mode for the door station camera. The
modes switch automatically by default.
Other:
contains the following parameters:
Mirror:
Reflect the image.
Flip:
Flip the image.
60HZ
: Use this mode if the light source equipment in the surveillance area connect to the
60Hz electrical grid. The exposure time is automatically set to the value divisible by 30
50HZ
: Use this mode if the light source equipment in the surveillance area connect to the
60Hz electrical grid. The exposure time is automatically set to the value divisible by 25.
In Door / Out Door:
Reduce or remove the flickering of indoor or outdoor light sources by
means of the pulse-width modulation.
DWDR:
Enable Digital Wide Dynamic Range mode. The available options are
«Low»/«Normal»/«High»
.
Smart NR:
This option increases 3DNR efficiency in low light conditions and reduces the
blurry effect of moving objects.
2DNR:
Reduce noise in low light conditions. The available image processing options:
«Low»/«Normal»/«High»
.
3DNR:
Reduce noise in low light conditions. This option does not affect the image detail, but
there may be traces of moving objects depending on value you set with the slider.
NOTE:
3DNR only works in
«Night» mode.
Anti-Fog:
Show better details in case of fog.
Color Correction:
Enabling this function allows for better rendition of colors by correction of
hues.
Anti-Tremble:
Reduce tremble if the device is exposed to vibrations.
Maximum Exposure Time:
Set maximum exposure time value. Available values:
«1/25»~«1/8000».
Auto Gain Control:
Automatically increase brightness in low light conditions. Bigger AGC
values result in higher noise levels
Day/Night Mode:
Activate
«
Day
»
and
«Night»
presets:
Schedule:
«
Day
»
and
«Night»
modes will switch as scheduled. When selected, you will
be able to set the schedule time in additional fields.
Light Sensor:
«
Day
»
and
«Night»
modes will switch via the built-in light sensor. Set the
operation mode in the drop-down list below.
“Day – Night”
- Day mode in high external