BeWAN ADSL Router User’s guide
89
2.
Determine the current PPP configuration
Enter
config print ppp
Module 'ppp':
1 pvc a1 8 35
1 welogin login@isp password chap
1 enableprimarydns relay
1 gateway local
1 enable
3.
Change the VPI or the VCI
You can enter
ppp 1 pvc a1 <vpi> <vci>
Where
<vpi>
and
<vci>
are replaced by the numbers provided by your ADSL operator.
4.
Change your Internet connection login and password
You can enter
ppp 1 welogin <login> <password> chap
Where:
<login>
corresponds with your Internet authentication login,
<password>
corresponds with the Internet access password.
5.
Display the PPP configuration received from your Internet access provider
Enter
ppp 1 info all
PPP 1: Channel 1 : open for IP, sent 13, received 15
PPP 1: PVC setting : port 0 vpi 8 vci 35
PPP 1: PVC status : connected
PPP 1: Transport : IP
PPP 1: Our login protocol : CHAP
PPP 1: Our login name : login@isp
PPP 1: Interface : 1 (02:01:71:03:02:79)
PPP 1: MAC address : 06:01:71:03:02:79
PPP 1: Phase : Network
PPP 1: LCP: state : Opened
PPP 1: LCP: local options : MRU=1500 magic=0
PPP 1: LCP: remote options : MRU=1500 magic=318929200 auth=0xc223
PPP 1: PAP: login as user : 'login@isp'
PPP 1: CHAP: login as user : 'login@isp'
PPP 1: IPCP: state : Opened
PPP 1: IPCP: local options : IP address=193.252.196.233
PPP 1: IPCP: local options : primary DNS server=193.252.19.3
PPP 1: IPCP: remote options : IP address=193.252.196.1
PPP 1: Transmitted : 391 bytes 13 packets
PPP 1: Received : 502 bytes 15 packets
PPP 1: Idle for : 25 seconds
PPP 1: Connected time : 0 hr, 0 min, 30 sec
Summary of Contents for ADSL Router
Page 1: ...User s guide...
