BeWAN ADSL Router User’s guide
52
Fixed IP address
You have chosen to assign fixed IP addresses to the computers on the local network. Proceed as
follows:
1.
Click on
start
, and then on
Control Panel
.
2.
Click on
Network and Internet Connections
, and then on
Network Connections
.
3.
Right click the mouse on
Local Area Connection
and then select
Properties
from the menu.
4.
Select
Use the following IP address
.
5.
In the box
IP address
, enter the IP address that you have decided to assign to the PC.
Important:
•
The PC’s IP address must imperatively be within the same addressing range as that of the
BeWAN ADSL Router.
•
The PC’s IP address must be unique, i.e. different from those of the other equipment on the
local network (computers, BeWAN ADSL Router...).
•
The PC’s IP address must be within a range reserved for private networks. Indeed, your
local network must not use addresses which are reserved for the Internet. This would cause
problems when connecting your network to the Internet.
If you have any questions about these elements, please check with a network specialist.
6.
In the
Subnet mask
field, enter the sub-network mask default value of the BeWAN ADSL
Router, i.e. “255.0.0.0”.
7.
In the
Default gateway
field, indicate the IP address assigned to the BeWAN ADSL Router.
Reminder: by default, the BeWAN ADSL Router’s IP address is “10.0.0.138”.
Summary of Contents for ADSL Router
Page 1: ...User s guide...
