4
screw. At this time, it is measured as the lower station. If you loosen the locking screw of the clamp
kits, let it automatically bounce to the highest position, and then tighten the screw, this is the upper
station.
7
．
Refer to the 3.3, Touch Screen Operation
8
．
Press the “Run” button to start testing
3.3 Touch Screen Operation
。
3.3.1 Connect the power (24V)
3.3.2 Turn on the power switch and check the emergency button whether loose. If you press it, pls
rotate the emergency button clockwise.
3.3.3 Enter the welcome interface. It will automatically enter the main interface after 3 seconds.
