5
3.3.4 After selecting the language, enter the system screen (as shown). Click the "Open Vacuum"
button and vacuum will turn on. and then it will fix the coating test panel.
Note:
1. Firstly, put the base material on the vacuum table and then turn on the vacuum, otherwise it will
be difficult to adjust the position after vacuum adsorption.
2. The base material must completely cover the pores on the vacuum table, otherwise the adsorption
strength will be greatly reduced, or even unable to adsorb
3.3.5 Preset the speed
1) Setting by button: Press
button to increase the speed, press
button to decrease the speed
，
2) Set up by running settings (3.3.0).
Note:
Coating speed will directly affect the quality of the film. To ensure the quality of the film, different
film should be in different speed.
