Beurer GL30 mg/dL, Instructions For Use Manual

Page: 25 / 32

Beurer GL30 mg/dL 23
6 M
EMORY
Your blood glucose result is automatically stored at every test. Exception: "CTL" was
activated during a test with control solution. The memory has a maximum capacity of 448
results. After that number is reached, the oldest values are progressively replaced by the
latest result. You can display the average values of your blood glucose readings for 7, 14,
21, 28, 60 and 90 days and also every single value.
Note
•
If values are already stored and you reset the date, the averages will be
calculated by the new date.
•
"---" shows that the memory is empty. "OFF" is displayed briefly and the
monitor automatically switches off.
6.1 Displaying averages and single values
You can display the average values of your blood glucose readings for the last 7, 14, 21,
28, 60 and 90 days. At the same time the monitor shows how frequently you have con-
ducted tests over this period. After the averages the single values of the last 448 tests are
displayed. The most recent result is displayed first and the oldest last. The monitor shows
the date and time of the test with the test result.
1 The monitor must be switched off. Press M.
2 The initial display is shown briefly. The blood glucose unit, date
and time are displayed. Press M again.
3 Displaying averages
The average value for 7 days is displayed as well as the number of
tests in this period (in Fig. 1: 14 results in the last 7 days).
(Fig. 1)
Press M again several times to display the averages for 14, 21, 28,
60 and 90 days and the number of tests in those periods. 01
flashes briefly.
(Fig. 2)
Fig. 1
Fig. 2