Beurer GL30 mg/dL, Instructions For Use Manual

Page: 20 / 32

Beurer GL30 mg/dL 18
8 If there is insufficient blood, repeat steps 5 to 7 with
the device set to a greater puncture depth.
9 Unscrew the cap carefully from the lancing device and
pull it off.
10 Place the safety shield flat on a hard surface. Press
the tip of the lancet into the safety shield so the lancet
no longer projects.
11 Pull the lancet carefully out of the lancing device and
dispose of the lancet in a sharps container.
Carefully dispose of all blood samples and materials
that have come into contact with them. This will pre-
vent injury and infection of other people.
12 Screw the cap (grey) on again.
5.2 Measuring blood glucose
1 Hold the monitor with the display facing you.
2 Insert a test strip into the monitor with the contacts first. Make sure that the
front of the test strip is facing you. The test strips can be touched anywhere
with clean, dry hands.
3 The monitor switches on automatically and shows consecutively the initial
display, the ambient temperature, and the code number. The monitor is ready
for a test as soon as the flashing blood drop symbol
6 is displayed.
4
If the numbers are not identical remove the test strip and code the monitor
see "4.3 Checking code number (coding)" page 14.