Beurer GL30 mg/dL, Instructions For Use Manual

Page: 16 / 32

Beurer GL30 mg/dL 14
3 Setting date and time
Note
•
It is vital to set the date and time. Only in this way
is it possible to save and subsequently retrieve
your measured values with the right date and time.
•
Time is shown in 12 hour format. Times before 12
midday are AM. Times after 12 midday are PM.
Example:
'PM 1:00 ' for 13:00 hours.
Set the year (calendar up to 2049) by pressing the M button.
Confirm with "SET".
The month display starts blinking. Proceed in the same way for
month, day, hour and minute.
4 Setting temperature unit
Press the M button to switch between °C and °F. Confirm with
"SET".
5
"dEL" is displayed and the Memory symbol starts blinking.
(Caution: all previously stored results will be deleted if you press
M now.)
Press the "SET" button. "OFF" is displayed briefly and the moni-
tor automatically switches off.
Replace the battery cover carefully
4.3 Checking code number (coding)
Test strips are classified into different code ranges because of variations in production
conditions. This is why coding is required when you
•
open a new container of test strips
•
find that the code numbers of the monitor and the test strip container do not match
when conducting a test.
Coding the monitor
1
There are no test strips in the monitor and it is switched off.
2
Hold the monitor with the display facing you.
3 Press the C button. The initial display is shown briefly and then SEL. The current
code number flashes.