manualshive.com logo in svg

Beumer stretch hood S, Operating Instructions Manual, Page: 98 / 192

Share
Download
Beumer stretch hood S Operating Instructions Manual Download Page 98

Maintenance 

BEUMER stretch hood® S 

 

98 

BA-6090103-EN 

19.08.09 

 

Inspection list 

Interval 

Subassembly 

Work / checks to be carried out 

Motor: 

•  Check the cable entries and the temperature. 

•  Unusual noise during operation? Check the 

bearings. 

•  Clean the cooling fins and air inlet openings. 

•  Clean the brake and check the working air gap.

Every 700 oper-
ating hours 

or monthly 

Chain drive 

Information on the work to be 
carried out in the Maintenance 
and Lubrication chapters. 

Visual check: 

•  Does the chain run straight? 

•  Does the chain sag by more than 1 to 2 % of 

the centre distance? 

•  Can wear and tear be detected on the sprocket 

wheels and the chain? 

•  Is the chain excessively dirty? 

•  Is the lubricant on the chain sufficient? 

Summary of Contents for stretch hood S

































































































































































































Reviews:

No comments