Beuchat VOYAGER-2G, Operating Manual, Page: 80 / 106

80
CDT (Countdown Timer)
While on the surface, the CDT can be set, started, and stopped.
Once set and started, it continues to run in the background when
a dive is started and becomes available as an ALT display.
• A (2 sec), while viewing SURF Main - to access CDT Status.
CDT Status, information includes (Fig. 84):
> Graphics Cdt with OFF (or ON) flashing.
> Countdown Time remaining (:min only from :59 to :10, then
min:sec from 9:59 to 0:00), or time set and ready to start,
or 0:00 if no time set or countdown is complete.
*If ON with time running or complete, the colon will be flashing.
• S (< 2 sec) - to toggle Status between OFF and ON*.
*A toggle from OFF to ON will start the countdown.
• A & S (2 sec), while OFF - to access Set CDT.
• S (2 sec) - to activate the Backlight.
• A (< 2 sec) - to revert to SURF Main.
• Revert to SURF Main after 2 min, if no button is pressed.
The CDT will run in the background, while on the surface and
during dives, until it counts down to 0:00, or it is turned OFF.
When a set Countdown Time reaches 0:00, the audible will
sound during which time the graphics Cdt OFF with 0:00 will be
displayed flashing on the Surface or Dive Main.
Fig. 84B - CDT STATUS
(On, running)
Fig. 84A - CDT STATUS
(Off, not set)