manualshive.com logo in svg

Beuchat VOYAGER-2G, Operating Manual, Page: 12 / 106

Share
Download
Beuchat VOYAGER-2G Operating Manual Download Page 12

12

•  FREE Dive NiBG Alarm (Caution zone, 7 segments) - 3 beeps 3 times. 

•  Entry into Deco during a FREE Dive (Permanent Violation) - 3 beeps 3 times. 

•  Free Dive Mode Countdown Timer reaches 0:00 - each 3 beeps 3 times.

During the following NORM Dive situations, the 10 second continuous tone will be fol-

lowed by a 5 second steady beep that will not turn off when acknowledged - 

•  Ascending above a required Decompression Stop Depth for more than 5 minutes 

(referred to as a Delayed Violation).

•  Decompression requires a Stop Depth of 70 FT/21 M or deeper.

•  Being on the Surface for 5 minutes after a Conditional Violation. 

BACKLIGHT

>  To activate the Backlight, while on the surface and during dives >> depress the S 

button for 2 seconds.

 

•  The Backlight will illuminate the display for button depression time plus the Duration 

time set 0 , 5 , or 10 seconds.

    

*The Backlight will turn Off if the button is held depressed for more than 10 seconds.

•  Press the button again to activate as desired.  

NOTE:  Extensive use of the Backlight reduces estimated Battery life.  

Also, the Backlight does not operate during a Low Battery Condition 

or when the VOYAGER 2G is connected to a PC.

Summary of Contents for VOYAGER-2G











































































































Reviews:

No comments