Beuchat VOYAGER-2G, Operating Manual, Page: 47 / 106

47
If O2 reaches 100% of the allowed limit (300 OTU), the O2
icon will replace NO DEC. High O2 is described later.
ASCENT RATE INDICATOR (ASC)
The ASC shows how fast you are ascending. When you exceed
the maximum recommended Ascent Rate for the depth you are
at, all segments of the ASC and the rate value will flash (Fig. 50)
until Ascent Rate is slowed below the alarm value.
The Ascent Rate alarm and speeds are speeds, refer to page 17.
NO DECO DIVE MODE
When Wet Activation is set On, operation will enter Dive Mode
when you descend to 5 FT (1.5 M) for 5 seconds, even if not yet
activated. When Wet Activation is set Off, it will not enter Dive
Mode unless it is activated first.
No Deco Main, information includes (Fig. 51) -
> Altitude (mountain) icon, if EL 2 to 7 (above Sea level).
> Current Depth with M (or FT) icon.
> Ascent Rate value (MPM or FPM) with - ASC - icon,
synchronized with the ASC, blank when not ascending.
> Dive Time Remaining (hr:min) with NO DEC icon.
> Elapsed Dive Time (hr:min) with wave/clock icon.
> Gas 1 (or 2) icon, one in use.
> NBG, O2BG, ASC - if applicable.
Fig. 50 - ASCENT TOO FAST
Fig. 51 - NO DECO MAIN