9
3
.
Fill bottle with water
and place bottle on brackets on the side of
machine. The spout of the tank will fit into tank reservoir.
Water Bottle
Brackets
Water Level Adj
.
The amount of water required for proper moistening of different grades
and types of tape will differ. Heavier adhesives or reinforced tapes will
normally require a high water level. Lighter tapes require less water and a
lower
level.
The water level is controlled by an adjusting knob on the water tank.
Loosen or tighten the knob depending on the level of water you desire.
4
.
Adjust roll guides
inside rear of machine to proper width of tape
Tape Guides
The tape roll guides should be properly set for the width of the tape being
dispensed. The roll of tape should be center in the basket area and the
roll guides adjusted loosely by lifting them and setting them on the desired
pre-cut
areas.
Summary of Contents for BP500M
Page 2: ...2 ...
