12
OPERATING INSTRUCTIONS
Be sure the power cord is properly inserted into the back of the machine and it is
plugged into the proper electrical outlet
Turn the machine on with the on/off button on the left front of the machine. A
pilot light will come on when unit is powered up.
The machine will not operate if the front cover is open. There is a safety interlock
switch that will only engage when the front cover is closed.
Cord Connection
On/Off Switch
Interlock Switch
1. After following the setting-up instructions and adjusting the machine for
correct water level, pressure plate weight and top heater temperature,
load machine with tape (as noted on page 10) and you will be ready to
operate the machine.
2. To feed the tape, just lightly touch the “button” for the length of tape you
wish to dispense. Only light momentary pressure is needed on the
dispensing “button”. The “button” controls an individual switch which
resets when the proper length of tape is dispensed.
3. This machine has the ability to dispense lengths of tape from 10 cm to 228
cm long. Just lightly touch the keypad for your desired length.
4. To double the length of your desired tape length, simply press the 2X on
the keypad and then the number on the keypad you wish to double. For
example, if you desire a 90 cm piece of tape, press the 2X keypad number
and the 45 keypad number and a 90 cm piece of tape will be dispensed.
5. To “Repeat” your previous length of tape, simply lightly press the “Repeat”
on the keypad and the same length of tape will be dispensed. This can be
performed continuously until a new number is pressed on the keypad.
Summary of Contents for BP500M
Page 2: ...2 ...
