CARE &
mAINTENANCE
WARNING:
Always unplug the product from
the electrical outlet and allow the Blades to com-
pletely stop before disassembling it for cleaning.
WARRANTY
Length of Warranty:
1 year from date of purchase
Within 1 year from date of purchase,
1) Return product to place of purchase (if
your dealer allows)
OR
2) Send product postage pre-paid to:
I.E.A.C.
3030 E. Vernon Ave.
Vernon, CA 90058
Please include original dated receipt,
explanation of defect and return name and
address as well as a contact phone number.
We will, within 10 days of receiving your
product, return a new or refurbished (at our
discretion) product at NO ADDITIONAL
CHARGE. We will also return your receipt. If
product is found to be in working condition,
we will return product postage collect.
PACK YOUR PRODUCT WELL!
We will not be responsible for damages
incurred as a result of improper packing.
Or contact us via e-mail at
4 English
beans, or chocolate.
1. Make sure all parts are clean and dry.
2. Cut solid ingredients into small pieces, as
needed.
NOTE:
Hard vegetables, such as raw carrots,
may require splitting and/or quartering for
proper product operation.
3. Assemble the Container onto the Base and
Motor Housing.
4. Place up to 1½ cups of solid or ¾ cup of
liquid ingredients into the Container.
NOTICE:
To prevent product/property dam-
age, do not overfill the Container.
5. Attach the Cover securely onto the Container
by aligning the arrow on the Cover with the
arrow on the Base.
NOTE:
The product will not operate until the
Cover is securely locked into place.
6. Plug the Power Cord into a standard 120-volt
AC electrical outlet.
WARNING:
Make sure the product is prop-
erly and completely assembled as described
above before plugging it into an electrical
outlet.
7. Press and hold the Pulse Control until ingre-
dients are at the desired consistency, and then
release the Pulse Control and allow the Blades
to stop completely.
8. Unplug the Power Cord from the electrical
outlet and remove the Cover by turning it in
the direction of the arrow marked OPEN.
9. Grasp the top of the Blade Assembly and
remove it. Turn the Container counterclock-
wise to release the tabs on the edges of the
Container from the tabs on the Base. Lift the
Container off the Motor Shaft and remove
contents from Container and then clean all
parts as described in the “Care and Mainte-
nance” section.
CAUTION:
Use caution when attaching or
detaching the Blade Assembly, as the Blades are
extremely sharp.
• Clean the product after each use. Wash the
Cover, Container, and Blade Assembly in hot,
soapy water and dry thoroughly. Clean the
exterior of the Base by wiping it with a soft,
damp cloth.
WARNING:
Do not immerse the Base in
water or other liquids.
NOTICE:
Do not use abrasive cleaners
or scouring pads to clean any part of the
product.
• Store the product in a cool, dry place.
