SECTION B
| INSTALLATION
PART A
–
PREPARING INSTALLATION
STEP 1. - CHECK FOR OBSTRUCTIONS
Check for any obstructions that may interfere in installation.
STEP 2. - CHECK VERTICAL & HORIZONTAL INSTALLATION DIMENSIONS
VERTICAL DIMENSIONS
HORIZONTAL DIMENSIONS
Check if top of installation space is level.
•
If H1
≠
H2, corrective actions may need to be considered
prior to installation
If W2
≥
W1, W1=Blind Width
(proceed to Part B)
If W2 < W1, by a value of:
0-20mm, Proceed to Part B (W1 = Blind Width)
20+, Consider corrective action to square installation space
Page. 5
