If you order a valance you will need to do your own fabric cut out for the bottom rail saddle position onsite
15. Mark the bottom of the valance where the saddle is to be positioned (in line with the bottom fixing point). Mark
both the left and right saddle positions
16. Remove the bottom rail end caps.
17. Slide the valance out of the bottom rail past the marked position
18. With a sharp pair of scissors make a cut out for the saddle to sit in (See picture 1 below)
19. Slide the valance and saddle back into the bottom rail (See picture 2 & 3 below)
20. Repeat steps 17, 18 and 19 for the second saddle.
21. Attach bottom rail end caps.
Picture 1
Picture 2
Picture 3
MOTORISATION
For motorised awnings you may need a qualified electrician to trim and attach plug to the lead.
Program motor as per instructions
https://www.betta-blinds.com.au/bbaa/installation-guides
A Cassette/Pelmet is recommended with motorised awnings to protect the motor from the elements.
If no cassette has been ordered the awning will need to be installed where the motor can be protected
from the elements. Motor warranty does not cover water damage.
Caution: Like all outdoor blinds, it is prudent to retract the blind in the presence of strong winds.
