V.3.0
FITTING INSTRUCTIONS
FAUX WOOD VENETIANS
BREAKAWAY CORD CONDESNER
Breakaway cord condenser is
pre-fitted to the lift cords so that when
a horizontal force is applied to the
cords entering the condenser it safely
breaks away eliminating any hazardous
loops.
If the cord condenser is pulled apart:
Untangle and untwist cords.
For 2 cords:
Press the cord condenser
together until it is fully closed.
For 3 cords:
Place the loose cord
in the opening in one half of the
cord condenser and press the cord
condenser together until it is fully
closed.
For 4 cords:
Place one of the loose
cords in the opening in one half of the
cord condenser, the remaining loose
cord in the opening in the other half
and press the cord condenser together
until it is fully closed.
If there are any doubts that the cord
condenser has not been re-attached
correctly it can tested by placing your
arm between the cords and pressing
downwards. The condenser should
break apart with minimal force, if it
does not breakaway tie cords out
of reach of children and contact a
reputable blind company to repair the
blind.
PLEASE READ THE INSTRUCTIONS BEFORE OPERATING THIS PRODUCT
TILT OPERATION
To tilt blind:
Pull on required tilt cord tassel to tilt slats to the
open/closed position.
Tilt blind horizontal before raising/lowering to extend the
life of the blind.
To lower blind:
Move lift cord towards middle of the blind
pulling down gently until cord lock releases.
To raise blind:
Pull lift cord downward until blind reaches
desired height.
To lock cords:
Pull lift cord towards the outside of the blind
and release. Cord will lock automatically.
MAINTENANCE
The product is maintenance free however we recommend
that regular visual checks are completed to ensure that
no components have been damaged, which could result in
operating difficulties and/or cause a safety risk.
If any maintenance is required we recommend that the work
is carried out immediately, by a reputable blind company.
WARNING
Young children can be strangled by loops in pull cords, chains, tapes
and inner cords that operate the product.
To avoid strangulation and entanglement, keep cords out of the reach
of young children.
Cords may become wrapped around a child’s neck.
Move beds, cots and furniture away from window covering cords.Do
not tie cords together. Make sure cords do not twist and create a loop.
