BETCO STEALTH ASD20B, Operator And Parts Manual

Page: 45 / 52

45
BATTERY CHECK CARD – HOUR METER
1. Verify that when turning on the machine, the battery check card has the
following starting sequence:
• Turning on of the LED which correspond to the set-up (red LED = “0”).
• Turning on of all the LEDs (check of the lamps)
• Turning on of the LEDs depending on the charge of the battery
2. Verify the hour meter functionality
• To verify which is the set-up you simply need to turn on the machine
and check which is the fi rst LED that turns on. Counting the LEDs
since the left side any LED correspond to a position and the LED
which turn on correspond to the current set-up.
• Verify that if the machine uses wet cell batteries the adjustment is on
position 1.
• Verify that if the machine uses GEL batteries the adjustment is on
position 4.
WARNING: A wrong set-up of the battery control card can
compromise the battery effi ciency and damage then in ir-
reversible way.
1. Fill up the solution tank and look for leaks around the solution valve
and the drain plug .
2. Verify that the water distribution on the fl oor is even and dependent on
the solution valve adjustment.
3. Check the internal cleanness of the water valve.
4. Verify the cleanness and functionality of the solution fi lter under the
solution tank cap.
HYDRAULIC PLANT INSPECTIONS
1 1
4 4