BETCO STEALTH ASD20B, Operator And Parts Manual

Page: 7 / 52

7
3. BATTERY INSTALLATION
The machine will be supplied with a battery charger and either two 12V Wet or
AGM batteries. The batteries must be housed in the battery tray in the battery
compartment beneath the recovery tank.
To insert the batteries you must:
A. Lower the squeegee and brush deck.
B. Open the rear latch
(2) that secures the tank.
C. Rotate the recovery tank as far as it will go, using the side handle (3) .
WARNING: To avoid acid spillage you can use sealed batteries.
WARNING: Perform one battery charging cycle before using the
machine.
4. TYPE OF BATTERY
To power the machine you can use:
• Wet
batteries
• AGM batteries
• Gel batteries
OTHER TYPES MUST NOT BE USED.
The maximum battery dimensions and the weight are:
Width 6.7 in (171 mm)
Length 12.9 in (329 mm)
Height 9.6 in (245 mm)
Weight 68 lb. (31 kg)
WARNING: Your charger and battery check card must be set ac-
cording to the type of battery you install. Call BETCO customer
service to ensure correct charger setting after replacement bat-
teries are installed.
• The batteries must be handled using lifting and transportation means suitable
for the weight and dimensions.
• They must be connected together in series, to obtain an overall voltage of
24V on the lugs.
• The electrical connection operations must be carried out by certifi ed trained
personnel.
MACHINE PREPARATION