PERSONAL PROTECTIVE EQUIPMENT TO WEAR WHILE OPERATING PNEUMATIC TOOL
Failure to observe the following warnings may result in physical injury and/or disease.
TECHNICAL DATA
AIR INLET
1/4” GAS
MAXIMUM PRESSURE
8 bar
MINIMUM INTERNAL HOSE SIZE (Ø)
6.0 mm
MEAN AIR CONSUMPTION
200 - 300 l/min
WEIGHT
1.2 kg
CARTRIDGE CAPACITY
310 ml
NOISE (ISO 15744)
SOUND POWER LEVELL
LwA = 95.2 dB
SOUND PRESSURE LEVEL
LpA = 84.2 dB
KEY TO SYMBOLS
a: air inlet 1/4” GAS
b: cartridge tube
c: handle
d: gun trigger
e: sealant supply regulating knob
f: airflow regulating knob
g: nozzle ring nut
h: oil lubrication
INSTRUCTIONS
Air supply connection
For correct use of the pneumatic tool, always keep to a maximum pressure of 8 bar, as measured at the tool inlet. Feed the pneumatic
tool with clean, condensate-free air
(picture 1-a)
. Excessively high pressure or humidity in supply air results in shorter life for the
mechanical parts and may damage the tool.
USE
Start / Stop
To start the air gun, press the trigger
(picture 1-d)
, and keep it pressed during the job to be performed. Releasing the trigger will cause
the pneumatic tool to stop quickly, thereby preventing silicone or sealants from being let out.
When the gun stops, place it in a firm and safe position.
Additional personal protective equipment to wear according to the values found in the environmental hygiene/risk
analysis survey if the values exceed the limits under current regulations.
ALWAYS WEAR EYE PROTECTION WHILE OPERATING PNEUMATIC TOOL OR PERFORMING
MAINTENANCE JOBS
ALWAYS WEAR HEARING PROTECTION WHILE OPERATING PNEUMATIC TOOL
ALWAYS WEAR PROTECTIVE GLOVES AGAINST PHYSICAL AGENTS WHILE OPERATING
PNEUMATIC TOOL
ALWAYS WEAR SAFETY SHOES
WEAR PROTECTIVE MASK AGAINST PHYSICAL AGENTS
WEAR PROTECTIVE HELMET
Libretto 1947M no CE.qxd:Libretto 1947H.qxd 25-05-2018 17:37 Pagina 9