10
INSTRUCTIONS FOR USE
EN
INSTRUCTION MANUAL
Model: 12V – Charge 5Ah-500Ah
CONTROL PANEL
Signalling LEDs
There are 15 LEDs on the front panel having the following functions:
• 4 battery status LEDs, indicating:
- Full : battery is charged and is in charge maintenance status
- Charging : battery charging
- Fault : battery is damaged
- Reverse : polarity reversal
• 1 battery charger status LED, «ON LED», battery charger on (colour BLUE).
• 1 operating status LED; indicates whether output is in accordance with selected mode.
Connected with the Start/Stop button. (Colour YELLO
:
).
• 2 operating mode LEDs, « Function »: Flash or Charge (colour YELLO
:
)
• 4 supplied current LEDs, « Amperage », described in next chapter (colour YELLO
:
).
• 3 supply voltage and battery type LEDs, « Volt/Bat », described in next chapter (colour YELLO
:
).
Operating mode selection b
X
ttons
T
K
ere are
b
X
ttons
• Start / Stop: starts or stops supply in the selected mode
• Function: selects operating mode
• Volt / Batt: selects supply voltage or the type of battery to charge
• Amperage: selects supplied current
• A/V (display): selects the information to be displayed
Digital Display
''A/V'' b
X
tton
The ”A/V” selector button selects voltage or current display.
