4
CHECKS AND MAINTENANCE
73
EN
AIR PRESSURE AND
TEMPERATURE SENSOR
Remove the tank (page 82).
The connector is positioned as indicated
in figure.
1) press the lock device;
2) Pull the connector upwards.
For re-assembly, proceed opposite the
above-mentioned order.
Attention: at the end of the operation en-
sure that the connector is blocked.
2) rotate the safety device as shown;
3) remove the connector.
For re-assembly, proceed opposite the
above-mentioned order.
CLICK
Summary of Contents for RR 350 EFI 2018
Page 14: ...14 EN...
