3
ADJUSTMENTS
38
EN
Apply the handlebar.
Apply the top u-bolt.
Refit the screws
6
. Tighten to the torque
indicated.
ADJUSTMENT OF THE
HANDLEBAR POSITION
The handlebar can be adjusted by rotating
it back and forth.
To adjust the handlebar loosen screws
1
.
Position the handlebar according to re-
quirements.
Tighten to the torque indicated.
Remove the screws
5
.
NOTE: Before removing the screws
5
heat
the area with a hairdryer of the type used
by coachbuilders.
Position the U-bolt as required.
At the end refit the screws
5
after the ap-
plication of thread lock fluid and tighten
to the torque indicated.
To adjust the position of the u-bolt remove
the screws shown in the figure.
Remove the handlebar.
6
25Nm
1
25Nm
40Nm
5
Summary of Contents for RR 350 EFI 2018
Page 14: ...14 EN...
