FILLING POOL WITH WATER
ATTENTION:
Do not leave pool unattended while filling
with water.
1. Fill pool to drain valve.
STOP
2. Turn water off. Check that the water is not collecting on any side to
ensure the pool is level. If pool is not level, drain water and re-level
ground by digging out. Never attempt to move the pool with water in
it, serious personal injury or damage to the pool may result.
NOTE:
Your pool may contain a great deal of pressure. If
your pool has any bulge or uneven side then the pool is not level,
the sides may burst and the water may discharge suddenly causing
serious personal injury and/or damage to property.
3. If level, fill pool to lowest pump valve.
STOP
4. Turn water off. Check valves for secure fit.
5. Fill the pool until the water reaches the welding line located
1.6in.-4.7in. (4cm-12cm) from the top of the pool.
DO NOT
OVERFILL
as this could cause the pool to collapse. In times of
heavy rainfall you may need to empty some of the water to ensure
the level is correct.
6. Check pool for any leaks at valves or seams, check any evident
water loss. Do not add chemicals until this has been done.
NOTE:
Drawings for illustration purpose only. May not reflect
actual product. Not to scale.
ATTENTION:
Do not use pump when pool is in use.
During the season of use of the swimming pool, the filtration system
must be necessarily put into service every day, enough for a long time
to assure at least a complete renewal of the volume of water.
6
INSTALLATION
Installation usually takes approximately 10-20 minutes with 2-3 people
excluding earthworks and filling.
Assembly of the Frame Pool can be completed without tools.
To lengthen the life of your pool, it is important to sprinkle the top rail
with the Talcum Powder before assembly. Talcum Powder is not
included and easily available in the market.
NOTE:
It is important to assemble pool in the order shown
below. Install your pools according to the following illustrations.
ATTENTION:
Do not drag the pool on the ground in
order to avoid damaging the liner on sharp objects. Bestway will not
be responsible for damage caused to the pool due to mishandling or
failure to follow these instructions.
NOTE:
Drawings for illustration purpose only. May not reflect
actual product. Not to scale.
1
2
5
3
4
6
8 ft. 6 in. x 67 in. x 24 in.
(2.59 m x 1.70 m x 61 cm)
7
8 ft. 6 in. x 67 in. x 24 in.
(2.59 m x 1.70 m x 61 cm)
8
0°
1.6in.-4.7in.
(4cm-12cm)
