2
SAFETY INSTRUCTIONS
WARNING
IMPORTANT SAFETY INSTRUCTIONS - READ AND FOLLOW ALL SAFETY INSTRUCTIONS -
SAVE THESE INSTRUCTIONS
When installing and using this electrical equipment, basic safety precautions should always be followed,
including the following:
• The pump is to be supplied by an isolating transformer or supplied through a residual current device
(RCD)having a rated residual operating current not exceeding 30 mA.
• The power source on the wall of building should keep more than 4m away from pool.
• The appliance must be supplied by earthed power source.
•
RISK OF ELECTRIC SHOCK
- The pump cannot be using while people are inside the pool. Forbid
the access of the pool in case of damage of the sand filter.
•
DO NOT BURY CORD.
Locate cord to minimize abuse from lawn mowers, hedge trimmers, and
other equipment.
• To reduce the risk of electric shock, replace damaged cord immediately.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
• Extension cords can’t be used.
• Risk of electric shock. Using the sand filter with an unmatched electrical supply is dangerous and will
permanently damage the sand filter.
• Do not remove the grounding prong or modify the plug in anyway. Do not use adaptor plugs. Consult a
qualified electrician for any questions relating to validity of your plugs or grounding.
• Handle the sand filter with care. Do not pull or carry the sand filter by the power cord. Never pull a plug
from the outlet by yanking the power cord. Keep cord free from abrasions. Sharp objects, oil, moving
parts, and heat should never be exposed to the sand filter.
• Always unplug this product from the electrical outlet before removing, cleaning, servicing or making any
adjustment to the product.
• Don’t plug or unplug the appliance if hand is wet.
• Always unplug the appliance:
• On raining days
• Before cleaning or other maintenance
• Leave it unattended on holidays
• When the appliance will be not used for long time, such as in the winter, the pool set should be
disassembled and stored indoor.
•
CAUTION:
Read the instruction before using the appliance and installation/reassembly every time.
• Safekeeping the instruction. For reconstruction the pool set every time, please always refer to the
instructions.
• If instruction is missed, please contact with Bestway or search it in website: www.bestwaycorp.com
• Electric installations should follow national wiring rules. Consult a qualified electrician for any
questions.
CAUTION:
This sand filter is for use with storable pools only. Do not use with permanently-installed
pools. A storable pool is constructed so that it is capable of being readily disassembled for storage and
reassembled to its original integrity. A permanently-installed pool is constructed in or on the ground or in
a building such that it cannot be readily disassembled for storage.
• This appliance can be used by children aged from 8 years and above and persons with reduced physi-
cal, sensory or mental capabilities or lack of experience and knowledge if they have been given super-
vision or instruction concerning use of the appliance in a safe way and understand the hazards
involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made
by children without supervision.
• Cleaning and user maintenance must be performed by an adult above 18 years old who is familiar with
the risk of electric shock.
NOTES:
• Place the sand filter on solid, level ground. Ensure the sand filter is at
least 3.5 meters away from poolside. Keep distance as far as possible.
• Pay attention to position pool and sand filter so adequate ventilation,
drainage, and access for maintenance is available. Never place the
filter in an area that may accumulate water, or on a walking path with
lots of foot traffic.
• It is necessary to have the plug accessible after installation of the pool.
The plug of the sand filter shall be at least 3.5m away from the pool.
• Atmospheric conditions may affect the performance and life span of
the sand filter; take adequate precautions to protect the sand filter from
unnecessary wear and tear that may occur during periods of cold or hot
weather and/or exposure to sun.
• Please examine and verify all sand filter components are present before use. Notify Bestway at the
customer service address listed on this manual for any damaged or missing parts at the time of
purchase.
• It is imperative to change as soon as possible all deteriorated parts. Only use parts approved by the
manufacturer.
• Do not allow children or adults to lean or sit on the apparatus.
• Do not add chemicals to the sand filter.
• When chemical products are used to clean the pool water, it is recommended to respect a minimum
filtration time to preserve the health of swimmers which depends on compliance of health regulation.
• Only the media provided or specified by the manufacturer is to be used with product installation.
• It is essential to check that the suction openings are not obstructed.
• It is advisable to stop the filtration during maintenance operations on the filtration system.
• Regularly monitor the filter clogging level.
• A weekly check is recommended for backwashing or cleaning. Minimum daily filtration operating time
of 8 hours is recommended to ensure clear pool water.
• It is essential to change any damaged element or set of elements as soon as possible. Use only parts
approved by person responsible for placing the product on the market.
• All filters and filter media shall be inspected regularly to ensure that there is not a build-up of detritus
thus preventing good filtration. The disposal of any used filter media should also be in accordance with
applicable regulations/legislation.
• Mind all the safety requirements and recommendations described in the manual. In case of doubt on
the pump or any circulation devices, contact a qualified installer, or the
manufacturer/importer/distributor. The water circulation installation shall comply with the European as
well as national/local regulations, especially when dealing with electrical issues. Any change of valve
position, pump size, grille size can cause a change of the flow and the suction velocity can be
increased.
• This product is not intended for commercial use.
Please read the instruction manual carefully and keep it for future
reference.
SAVE THESE INSTRUCTIONS
