5
OWNER’S MANUAL
IMPORTANT SAFETY
INSTRUCTIONS
When installing and using
this electrical equipment,
basic safety precautions
should always be followed,
including the following:
READ AND FOLLOW
ALL INSTRUCTIONS
WARNING
- This is not a TOY. Children should be
kept out of reach from this robot and its
accessories.
- Never allow children to operate this
product.
- This robot is not intended for use by
someone with reduced physical, sensory
or mental capabilities or a lack of
experience and knowledge unless they
have been given instructions concerning
the appliance and are under supervision
of the person responsible for their safety.
- Make sure the robot is fully immersed in
the water before operation. The minimum
water level required to operate the robot
must reach above the swivel head of the
robot. Operating the robot when it is not
immersed in the water correctly could
damage the unit and void the warranty
as a result.
- Maximum operating depth in water is 3
meters (10 ft.).
- Operating water temperature: 5°C (41°F)
- 35°C (95°F).
- Only use the detachable supply unit
(external adaptor) provided with this
robot to charge the battery.
- Detachable supply unit
(external adaptor).
- This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities,
or lack of experience and knowledge,
unless they have been given supervision
or instruction concerning use of the
appliance by a person responsible for
their safety. Children should be
supervised to ensure that they do not
play with the appliance.
- Connect the external adaptor to a power
source through a residential current
device (RCD) / a ground fault circuit
interrupter (GFCI). If in doubt, consult a
qualified professional electrician.
- Do not use this robot if any damage is
detected.
- Replace damaged parts as soon as
possible. Only use parts certified by the
distributor or manufacturer.
- Turn off the robot, disconnect the
external adaptor from the power source,
and unplug the external adaptor from the
charging base, before detaching the
robot from the charging base.
- Disconnect the robot from the supply
mains and make sure the robot is power
OFF prior to servicing it such as cleaning
the filter and swivel smoothing-ring.
- The battery installed is a rechargeable
Li-ion battery pack. Never attempt to
replace it.
- The robot is only to be recharged with
external adaptor and charging base
delivered with this product.
- DO NOT handle the robot, external
adaptor and charging base while it is
charging with wet limbs and without
shoes.
- You should not operate this robot when
people/pets are present in the water.
- DO NOT use this robot without an intact
filter in place, otherwise your warranty
will be voided as a result.
- Suction entrapment hazard: This robot
generates suction. Do not allow hair,
body, and any loose parts of your
clothing to make contact with the suction
hole of the robot during its operation.
- Never insert body parts, clothing and
other objects into the openings and
moving parts of the robot.
- DO NOT use this robot to pick up any
toxic substance, flammable and
combustible liquids such as gasoline,
and in the presence of explosive or
flammable fumes.
- Under no circumstances should you
attempt to disassemble the robot and
replace the impeller, motor, and battery
by yourself.
- Never insert fingers and any object to
touch the impeller.
- This robot shall not be used by children.
- The battery must be removed from the
robot before it is scrapped.
- This robot contains a battery that are
only to be removed by skilled persons.
- The robot must be disconnected from the
supply mains as the battery is removed.
- For detail regarding battery dsiposal,
refer to the section “Battery Disposal” in
this manual.
- The battery must be disposed safely in
accordance with local ordinances or
regulations.
- The robot contains a maintenance-free,
rechargeable lithium-ion battery pack,
which must be disposed properly.
Recycling is required; please contact
your local authorities for more
The robot has a water-propelling nozzle at the bottom of
the swivel head. Water is first sucked in through the
suction mouth at the bottom of the robot, which then
goes through the filter and is discharged via the
propelling nozzle. Water jetting from the nozzle propels
the robot forward. Once the robot stops against an
obstacle such as the pool wall, its side flap sways and its
swivel head turns 180
o
, allowing the robot to move in the
opposite direction. The robot moves in a generally
straight pattern in one direction and in an arc pattern in
the other direction. The robot vacuums the pool bottom
as it moves, collecting debris in its compartment.
Part List
P05700
P05626
P05628
P05632
P05627
P05697
P03880
P03879
Part No.
Part Code
QTY
1
2
3
4
5
6
7
8
1
1
1
1
1
1
1
1
1
2
3
4
5
6
7
8
information.
- External adaptor and charging base:
• Never use the external adaptor and
charging base for anything other than
charging the battery of the robot that is
supplied in the same pack.
• The external adaptor and charging
base should not be used outdoors, nor
should it be exposed to rain, humidity,
any liquid or heat.
• The transformer (or external adaptor) is
to be located outside zone 1.
• Keep the external adaptor and charging
base out of reach of children.
• Never use the external adaptor and
charging base if any damage is
detected.
• DO NOT handle the external adaptor
and charging base with wet hands.
• Keep the external adaptor
disconnected from power when it is not
in use.
• Never attempt to open the external
adaptor.
• If the supply cord is damaged, it must
be replaced by the manufacturer, its
service agent or an equally-qualified
person in order to prevent hazards of
any kind.
• Make sure the robot is completely dry
before charging.
CAUTION!
- This robot is designed for underwater
use only; it is not an all-purpose vacuum
cleaner. DO NOT attempt to use it to
clean anything other than your pool.
- Use only original accessories delivered
with this product.
- DO NOT use this robot right after
pool-shocking. It is recommended to first
leave the pool circulating for at least
24-48 hours.
- If you are planning on using the robot in
a saltwater pool, make sure all salt are
dissolved before placing it into the water.
- It is not recommended to use this robot
with another automatic cleaner/cleaner
simultaneously.
- Avoid picking up hard, sharp objects with
this product which may damage the robot
and filter.
- To avoid damaging the external adaptor
and charging base, do not attempt to
carry the robot by the cable of external
adaptor or pull the cable to disconnect it
from the power source and charging
base.
- Charge the robot indoors in a clean, dry
area with good ventilation and away from
sunlight.
- DO NOT leave the robot charged for over
10 hours.
- If the robot will not be used for an
extended period, detach it from the
charging base and use a damp cloth to
clean and dry the robot and its
accessories. Make sure to charge the
robot to about 30% to 50% of the battery
capacity before it is stored. Store in a
well-ventilated area away from sunlight,
heat, ignition sources, pool chemicals,
and children. Recharge the robot every
three months.
- All actions concerning the disassembly of
the swivel head (ie. battery disposal) can
only be carried by an authorized
technician.
Above warnings and cautions are not
intended to incorporate all possible
instances for risks and / or severe
injuries.
Pool / spa owners should
always exercise extra caution and
common sense when utilizing the
product.
SAVE THESE
INSTRUCTIONS
