BestWater Jungbrunnen 66-10, User Manual

Page: 52 / 88

52
Installing and connecting
EN – Englisch
Screw the screw-in connector EVL
143801 into the connection sleeve.
Connect the 3/4“- connection sleeve
AM 343414 to the Water stopper.
Put the 3/8“- plastic hose into the
screw-in connector EVL 143801 up to
the limit stop (approx. 2.1 cm).
Check whether the safety ring was
properly inserted.
NOTE:
The connection on the corner valve
as well as on the BestWater system
will stand under full pipe pressure
and should be produced particular-
ly carefully. Check therefore, with
open water supply, both connec-
tion points for leakage tightness.
Installation – ports
The Water stopper
To connect the Water stopper, proceed
as follows:
Insert the battery into the Water Stop-
per and screw this onto your water-
connection with the seal screen. Now
screw the respective connection sleeve
onto the Water stopper.
Please place the detector on the deep-
est point in your built-in cabinet.
Change the batteries after every filter
change or once a year.
To make the connection, use the Im-
age for help and proceed as follows:
Bevor attachement the connection
sleeve must be connected to the
Water stopper.
Screw connector
safety ring
3/4“- connection sleeve for
the connection of washing
machine one and/or
dishwasher. This is included
in the scope of delivery.
For the assembly, the plug
connector must still be
screwed in.
Water stopper with integrated
strainer
corner
valve