BestWater BW 1500, Instruction Manual

Page: 15 / 24

www.bestwater.de 15
French degree = 0,10 0,20 10,00 0,56 1 0,58
1 gpg = 0,143 0,29 14,30 08 1,43 1
Table 5. Programming of parameters
Parameter Programming Display
Current time If the Symbol shows, hold the button and for 5
seconds, until the Symbol disappears.
1. Press to get access to the settings, like in LR1.
Parameter setting "Time" will show automatically.
2. Press
again and the current time will be shown (LR2);
the value "12" starts blinking. With the buttons and
can you change the value.
3
．
Press again and the value of minutes "30" starts to
blink. With the button and can you change the value.
4
．
Press again and the change will be saved.
LR1:
Settings
Current time
Time of ration
Water hardness
LR2:
Current time
12
：
30
Start Time of
Regeneration
1. Press and in LR1 "advanced settings" will show.
2. Press and the Parameter "Start time Regeneration" will
be shown. Press and the actual value, like in LR3, will be
shown. The value "02"of the Parameters is blinking and can
be changed with
and .
3. Press again , the value "00" starts to blink. with and
can you change the value.
4. Press again and the settings will be saved.
LR3:
Start Time of
Regeneration
02 :00
(Hour: Min)
Water
hardness
1
．
Press and in LR1 "advanced settings" will show.
2. Press and the Parameter "Water hardness" will be
shown. Press and the current value, like in LR4, will be
shown. The value "300"of the Parameters is blinking and can
be changed with
and .
3. Press again and the settings will be saved.
LR4:
Water hardness:
300 mg/L
11. first time of Usage
11.1. Vent the installation
For safety reasons, it is necessary to bleed the entire system before the first start-up. First,
the water supply to the water treatment system must be stopped or the slide switch of the
bypass set to "closed". Then the valve on the water softener for sampling must be open and
the water inlet can be opened slowly, step by step, to let water run into the system. The air
escapes audibly through the inflowing water through the open valve on the water purifier.