BestWater BW 1500, Instruction Manual

Page: 11 / 24

www.bestwater.de 11
Drawing C. An example of a recommended assembly scheme
The following requirements should be observed for assembly and use:
•
All parameters such as water hardness, time, etc. are already set on delivery.
If you do not supply the system with power for a longer period of time (ap-
prox. 30 days), the values must be reset.
•
The menu language is German, another language can be set before delivery
•
The water hardness is automatically determined by the system and "sof-
tened" according to your specifications
•
Special knowledge or execution by a specialist is advisable during installation
It is absolutely necessary to use a drinking water filter, if possible, with a pres-
sure reducer, with at least 50-micron filter
•
All connections must be made in accordance with the applicable guidelines
and standards.
•
The subsurface must be level and able to bear the weight of the filled water
system
Connections must be made according to local conditions
• The connection to the existing installation must be made using flexible hoses
Control valve control head may only be connected to the existing water sys-
tem with flexible hoses.
•
Flexible hose included should be connected to the drain. The line should not
be longer than 6 m.
•
In the case of threaded connections without an additional seal, a suitable
sealant e.g. Use PTFE Teflon tape.
•
Only open the main water connection when all work has been properly car-
ried out
Ga
rd
en
Wa
te
r
so
fte
ne
r
Ac
tiv
at
ed
ca
rb
on
fi
lte
r
Pr
e
-Fi
lte
r
Water outlet
Sewerage
Water Inlet