User’s instructions
20
cleAninG And MAintenAnce
Clean the appliance and the loose parts thoroughly after each use:
1. Turn the speed dial to setting 0 (off).
2. Fill the blender jar for ¼ with warm water.
3. Turn the speed dial to setting 1.
4. Switch off the blender after about 20 to 30 seconds (‘0’) and disconnect the plug from the wall socket.
The knives are clean now.
You can also wash the blender jar, lid and cap in soapy water. Rinse all parts thoroughly to remove all
soap residue and dry thoroughly.
Use only lukewarm water, hot water can cause cracks.
5. Clean the motor unit with a damp cloth, if necessary moistened with a couple of drops of washing-up
liquid. After cleaning, dry the motor unit thoroughly.
6. Store the blender.
•
Clean the blender jar after each use.
• Never use corrosive or scouring cleaning agents or sharp objects (such as knives or hard brushes)
to clean the appliance.
• Do not immerse the motor unit in water, or in other liquids.
• Do not leave the blender jar to soak in soapy water for too long.
the enVironMent
• Dispose of packaging material, such as plastic and boxes, in the appropriate waste containers.
• When this product reaches the end of its useful life do not dispose of it by putting it in a dustbin;
hand it in at a collection point for the reuse of electrical and electronic equipment. Please refer to the
symbols on the product, the user’s instructions or the packaging.
• The materials can be re-used as indicated. Your help in the re-use, recycling or other means of
making use of old electrical equipment will make an important contribution to the protection of the
environment.
• Contact your municipality for the address of the appropriate collection point in your neighbourhood.
GUArAntee terMs
The importer guarantees the appliance against defects caused by manufacturing and/or material faults for
60 months from the date of purchase, subject to the following conditions.
1. No charges will be made for labour costs or materials during the warranty period. Any repairs carried out
during the warranty period do not extend the warranty period.
2. The importer automatically becomes the owner of any faulty parts that he replaces or a faulty appliance
(in the event of replacement of the appliance).
3. All claims submitted under warranty must be accompanied by the original bill of sale.
4. Claims under warranty must be submitted to the dealer where the appliance was purchased or to the
importer.
5. The warranty is issued solely to the first purchaser and cannot be transferred.
6. The warranty does not cover damage caused by:
a. Accidents, incorrect use, wear and/or neglect.
b. Faulty installation and/or use in a manner contravening the prevailing legal, technical or safety
regulations.
c. Connection to a mains voltage other than the voltage specified on the type plate.
d. Unauthorized modifications.
e. Repairs carried out by third parties.
f. Careless transport, i.e. without suitable packaging materials or protection.
7. No claims may be made under this warranty for:
a. Losses incurred during transport.
b. The removal or changing of the appliance’s serial number.
8. The guarantee does not cover power cords, lamps or glass parts.
9. No claims can be submitted under this warranty for damage other than the repair or replacement of faulty
parts. The importer can never be held responsible for any consequential loss or damage or any other
consequences, resulting either directly or indirectly from the appliance supplied by the importer.
Englis
h
Summary of Contents for AKL217
Page 37: ...Manual del usuario 33...
