![background image](http://html1.mh-extra.com/html/bestron/ahd2000p/ahd2000p_instruction-manual_2741069016.webp)
instruction manual
16
English
operAtion - general information
The appliance is intended only for
domestic use, not for
professional use.
1. Mouthpiece
2. Diffuser
3. “cool shot” switch
4. Heat switch 1-2-3
5. On/off switch 0-1-2
6. Grid
7. Hang up loop
8. Power cord and plug
Figure 1
operAtion - before use for the first time
1. Remove the packaging.
2. Clean all the accessories to remove any residues that may be left from the manufacturing process (see
“Cleaning and maintenance”).
The appliance may emit a little smoke and a characteristic smell when you switch it on for the first time.
This is normal and will stop on its own. Make sure there is sufficient ventilation.
operAtion - use
1. Make sure that the On/Off switch of the appliance is set to 0 (Off).
2. Insert the plug in the wall socket.
3. Put the On/Off switch (5) on 1. Or for a harder blow power on 2.
4. Adjust the heat with the heat switch (4).
I = cold
II = tepid
III = hot
• In case of real wet hear, it is better to start with drying on a higher level. Switch the hair dryer on to
a less hot level as the hair become dryer.
• To give your hair more volume, you can use the diffuser. Rotate in a circular motion over your skin
until the hair is almost dry.
• Dry your hair in front of the mirror is often a difficult task. Just try without looking in the mirror. Bend
your head a little bit forward so you can see what your doing. You will see, it works quite good!
• Don’t put the mouthpiece too close to the hair when the heat switch is on level III. This way you
can damage your hair.
5. Use the “cool shot” button to fixate the hair.
Never close the back of the appliance. This
way it can overheat.
By twisting the mouthpiece you can guide the
airflow to a particular place.
You can also get more volume by blowing
up against the hair till it is almost dry. After
that blow in the right direction.
Figure 2 Change the mouthpiece
2
5
6
1
3
7
8
4