user’s instructions
22
English
• Never immerse the appliance, the power cord or the plug in water or other liquid. After washing the filters
make sure they are thoroughly dry before returning them to the appliance.
operAtion - General
The appliance is intended only for domestic use, not
for professional use.
1. Telescopic tube
2. Hose
3. Hose connector
4. Hose grip
5. Mechanic suction pressure control at the handle
6. Combi nozzle
7. Motor unit
8. Cover
9. Cover release button (dust bag)
10. Vacuum-cleaner handle
11. Rear wheels
12. Swivelling front wheel
13. Cord-rewind button
14. On/Off switch
15. Indicator, “dust bag full”
16. Crevice tool / Dusting brush
17. Exhaust filter
18. Storage bracket
19. Electronic suction pressure control
operAtion - Before use for the first time
1. Verify that a dust bag is fitted. Fit a dust bag, if necessary. See ‘Changing the dust bag’.
operAtion
1. Rotate the hose connector into the hose opening on the motor unit to the right (see Figure 2a). To
remove the hose, rotate the connector to the left and pull the connector from the hose opening.
2. The power cord has a yellow and red mark, see Figure 2b. Pull out the cord to the yellow mark.
Never pull out the power cord beyond the red
mark. This could damage the power cord.
3. Put the plug in the wall socket, and press the
On/Off switch. To switch off the appliance, press
the On/Off switch again, see Figure 2c.
4. The appliance is now ready for use. You can
move the vacuum cleaner while you are
cleaning by pulling on the hose grip. You can
lift the appliance with the vacuum cleaner’s
handle, see Figure 2e.
18
18
7
12
2
4
5
1
6
11
10
14
9
3
15
8
13 19
17
16
b
c
d
a
e
