Section 5
Attach Side Bows to Header/Fabric Assembly (cont.)
Page 11
P11 - 54722 - Rev. I 0213
Installation Instructions - Supertop NX
© 2013 Bestop, Inc.
Step 2
Insert the end of the Right Side Bow into the
hole in the right side of the Header/Fabric
Assembly, aligning the two holes in the
tubing with the two holes in the header.
Make sure that the Spring Catch faces in.
Secure the Right Side Bow in place with
(4) #8 x 1/2” Pan Head Washer Screws:
two from the underside of the Header/Fabric
assembly, and two from the topside.
Repeat on left side, using Left Side Bow.
Step 3
Replace the protective flaps on both sides,
and re-insert the screws you set aside, two
for each side.
Step 2
Step 2
486.52 (Right)
(cont.)
1
2
Right Underside
Right Topside
Step 3
Header/Fabric Assembly
Right Underside
2
1
3
Hardware
Pan Head
Washer Screw
Qty. 4 per side
Part # 393.79
