background image

51440, 51443

1

Rev. C   0301

Model: Toyota Land Cruiser, FJ40, 1964 - 1984                       Part Number 51443

Top Kit, Soft Doors Included

Note:  Use of this product on some vehicles may not allow the use of factory side mirrors.
Note:  Use of this product on some vehicles may require the removal of the entry light bulbs.
Note:  On vehicles built after 1975 that have never had a soft top, a metal tailgate panel will need to be ordered. Order Part

Number 51042-01. (Removing the hard top also removes the tailgate).

Model: Toyota Land Cruiser, FJ40, 1964 - 1984                       Part Number 51440

Top Kit Only, Soft Doors Not Included

Note:  On vehicles built after 1975 that have never had a soft top, a metal tailgate panel will need to be ordered. Order Part

Number 51042-01. (Removing the hard top also removes the tailgate).

Installation Instructions and Owner's Manual

Congratulations on your purchasing decision. Bestop designed this Convertible Top to give you years of dependability and performance with
proper care.  If you encounter any problems during the installation of your Convertible Top, or at any later date, please contact your authorized
Bestop dealer or call our Consumer Response Department,  Monday - Friday 8AM-4:30PM (MST)  at 1-800-346-3910 or (303) 465-1755
in Colorado.

Note:  Please read this manual thoroughly before beginning the installation.  After completing installation, keep this manual

for future reference.

by

WARNING

This product is designed to enhance the appearance of the vehicle and to shield the occupants from ordinary weather conditions.
Do not rely, in any way, on the components of this product to contain occupants within the vehicle, or to protect against injury
or death in the event of an accident. This top will not protect the occupants from falling objects. Never operate vehicle in excess
of manufacturer’s specifications.

WEAR SEAT BELTS AT ALL TIMES.

Read and follow, precisely, all installation instructions provided when installing top. Failure to do so may result in a poor fitting
top and could place occupants of the vehicle in a potentially dangerous situation.

Summary of Contents for 51440














Reviews: