P10 - 44943 Rev. A 1216
Installation Instructions - Rear Tire Carrier
© 2016 Bestop, Inc.
Page 10
Section 6
Attach Tire Carrier Post to Swing Arm & Lubricate Spindle
Step 1
Hardware
Step 1
Attach the Tire Carrier Post, #508,61 to the
Swing Arm Assembly using two (2) M14
Nylon Lock Nuts #482.10 and two (2) M14
Washers #482.94.
Vehicle not shown
for clarity
M14 Flat Washer
Part #482.94
Qty. 2
M14 Nylon Lock Nut
Part #482.10
Qty. 2
508.61
Step 2
Step 2
Locate the grease fitting (zerk) on the back side
of the Tire Carrier Swing Arm pivot.
Using a grease gun, fill the Swing Arm pivot
until grease begins to leak out the bottom of
the housing.
Use any standard automotive or lithium grease.
Lubricate
the Swing Arm
Pivot here
Tools
Grease Gun
22mm Wrench
Socket Wrench
and 22mm
Socket