BESTip ATA Combo User Manual
11
Physical Installation
Follow the instructions for correct connection:
1.
Connect one end of an RJ-11 phone cord to the
Phone
connector on the back of BESTip ATA Combo. Connect
the other end to the analog phone sets or C.O ports of the
PBX.
2.
Connect the provided network cable into the
LAN
port of
BESTip ATA Combo. Connect the other end of the cable
to your network eg. a router, hub or an ADSL modem.
3.
Attach the DC power adapter cord into the power
connector of BESTip ATA Combo and a live power outlet.
Hookup for BESTip ATA Combo
Note
: A crossover network cable may be required when
connecting to ADSL Modem.
BESTip ATA Combo User Manual
12
Chapter 3: Setup
After connection, follow the easy instructions to setup the
BESTip ATA Combo. You can establish your setup or modify it
at any time by launching the BESTip.
Be sure the BESTip is well-connected and connect the power
adaptor. You must allow the BESTip to finish booting before you
enter the setup mode.
Entering Setup Mode
1. After turned on, the BESTip will start
self-testing, and the LCD screen will
display as shown right.
2. After system finishing initializing, the
system will start up DSP.
3. For the first time, the LCD will
display
Enter Setup Mode - Push
Down=Yes
. Press button on
the front panel to enter setup mode.
Note
: When BESTip finishes booting, you can always use
or buttons to scroll the menu and press button
to enter the current menu.