BESTip ATA Combo User Manual
45
displayed is counted from 00:00:00, it means your BESTip is
not successfully registered to the Gatekeeper and your network
connection or configuration might be incorrect. Please refer to
“Chapter 3: Setup
”
in this manual for network configuration.
If you see the
DNS Lookup Fail
flashing, it means your BESTip
is not successfully connected to the Internet. Please also refer
to “Chapter 3: Setup
”
in this manual to configure your network.
To Make a BESTip-to-BESTip Call
If the receiver you call is equipped with an BESTip, you may
enter the Device ID # directly and talk to the remote BESTip
receiver.
1.
Make sure the receiver you want to call is equipped with a
BESTip connected to the Internet.
2.
Pick up the handset, and you will hear a ready tone. Dial the
ID No. of the receiving party and ended with a # key.
Note
: Every BESTip has an unique eight-digit ID number found
at the bottom of the device.
For example
：
The ID number of the receiving party is
19990023, so you need to dial 19990023#.
3.
Hold the handset, and wait for the connection. You will hear a
ringback tone indicating that your remote BESTip is ringing.
Otherwise, you will hear a busy tone if your remote BESTip user
is on the phone.
4.
Once the connection is established, you can enjoy your
communication with your receiving party.
5.
Hang up the phone once the conversation is done.
Internet
BESTip ATA Combo User Manual
46
To Make a BESTip-to-Phone Call
With Internet Telephony Service Provider (ITSP) service
function ready, BESTip is able to call any real telephone around
the world. You need to have an active ITSP account to make
BESTip-to-Phone call. Please contact our local distributor to
recharge your device account.
In this mode, the receiver can answer an Internet phone call
with a regular phone.
1.
Make sure that your BESTip is setup properly, and connected
to the Internet
2.
Pick up the handset and you will hear a ready tone.
3.
Dial your destination number as you normally do from your
touch-tone phone.
For Domestic Long-Distance Calls
[DDD prefix code] + [Area code + Telephone number] + #
For International Calls
[IDD prefix code] + [Country code + Area code + Telephone
number] + #
4.
Hold the handset and wait for the connection.
5.
Once the receiving party picks up the call, you will hear a
short beep tone that advises you the billing is start. You can
enjoy the cheap long distance conversation now.
6.
Once the conversation is done, simply hang-up the phone.
You can check the Call Detail Record on the ITSP Platform.
Please get login ID and password from your local dealer.
Internet