BESTip ATA Combo User Manual
43
Chapter 4: To Make an Internet Call
After having finished the setup in Chapter 3, you are ready to
operate your BESTip. Refer to the illustration below to connect
your BESTip with other devices.
Over Internet or TCP/IP networks, BESTip provides two modes
of voice communication: BESTip-to-BESTip and
BESTip-to-Phone modes. It allows BESTip users to save
greatly on long-distance and international call charges.
Hookup for BESTip ATA Combo
Testing Before Making a Call
After finishing the connection and configuration of your BESTip,
be sure the BESTip is turned on and well connected. You must
allow the BESTip to finish booting before operating.
1. Dial-Up Mode
1.
BESTip will start self-testing, and
the LCD screen will display as shown
right.
BESTip ATA Combo User Manual
44
2.
Once the system testing finishes, it
will go for standby status.
3.
Please press to dial ISP to
establish Internet connection.
4.
Once Internet connection is
established, you will see
Blue LED
On-Line signal
will be on. The
display will show the balance and the
message “
Ready for Dial
” as well.
2. Broadband Mode
1.
BESTip will start self-testing, and
the LCD screen will display as shown
right.
2.
Once the system testing finishes,
the screen will display the local time
according to the country code you set
and Blue LED On-Line signal will be
on.
3.
You can press to see the
balance and the message “Ready for
Dial” will be shown on the display as
well.
Pick up your telephone handset now, and you can hear a ready
tone that means the basic installation is finished successfully.
Note
: The LCD screen will show the current time of your
country according to the country code pre-configured. If the time